The beast tank has grown to be unprecedented strong and wild, with a 27mm
chest, The newest TFV12 Sub ohm tank is coming with the ever biggest & cloud-
chasing coil heads: the V12-T12 (Twelve Coils) and V12-X4(quadruple coils) and
V12-Q4 (quadruple coils), which definitely makes it to be the cloud beast king for
the year 2017, Innovation keeps changing the vaping experience!
It is larger, stronger and crazier. The large size V12-T12, V12-X4 and V12-Q4 coil
heads improve the efficiency of atomization, and compati ble with various mods
with high output power. The powerful coil heads for the best tank, it is the sword
from the king which makes anything possible.
TFV12 features with large size and 6ml e-juice capacity, which can satisfy several
times vaping. TFV12 is just like the true king that is capable with anything.
Comparing with TFV8, there is a 3.5mm increase in diameter and 30% increase in
air slots area of TFV12; bigger inner diameter delrin drip tip for much more vapor,
just have an open draw with the king’s experience.
Top rotary refill design makes filling as easy as it gets. Leak proof e-liquid slot can
significantly solve leaking problem.
It supports single coil build when used with the silicone pad.
V12-RBA-T supports single coil build
Before starting make sure your hands are clean.
Taking RBA apart.
Installing the pre-wrapped coil.
Place the coil between the posts and wrap the ends around the screws and tighten
up, once all in place make sure the coil is fixed in the center and lined up with the
air hole, and also make sure the coil is NOT touching the base.
Position and cut the ends of wire off.
Cut a strip of cotton and make sure it’s not too much, and not too little.
Insert the cotton, and place it in the middle
Cut the cotton at an angle. Make sure it’s not too short and not too long.
Wet the coil with your e-liquid and adjust the cotton.
Warning: Coils must be checked for resistance before they are fired on a device,
and re-checked periodically to ensure the resistance remains the same.
Before starting make sure your hands are clean.
Taking RBA-T apart.
Position and cut the ends of wire off.
Cut a strip of cotton and make sure it’s not too much, and not too little
Insert the cotton, and place it in the middle
Cut the cotton at an angle. Make sure it’s not too short and not too long.
If you book the pre-sold kit on the official website, you can get a T-shirt
printing“SMOK V12”as a gift, only 100 pieces are waiting for you.